DragonBoard 410c Tutorials From https://developer.qualcomm.com/hardware/dragonboard-410c/tutorial-videos
Modifying Kernel for UART Configuration on DragonBoard™ 410c
In this tutorial you’ll learn how to make kernel changes and rebuild to configure low-speed UART on the DragonBoard™ 410c featuring the Qualcomm® Snapdragon™ 410 processor, which in this video is running Android.
Using GPIOs on low speed connector on DragonBoard™ 410c
In this tutorial where we are running Android, you’ll learn how to export and toggle the GPIO pins on the DragonBoard 410c, featuring the Qualcomm Snapdragon 410 processor. We’ll end the tutorial showing you how to use the GPIO pins to connect and blink an LED.
Loading Linux-based Ubuntu on DragonBoard™ 410c
This tutorial shows you how to flash Linux based on Ubuntu on the DragonBoard 410c, which featured the Qualcomm Snapdragon 410 processor. You’ll need a micro SD card of at least 1GB for these easy flashing instructing.
Interfacing I2C Grove Digital Light Sensor on DragonBoard 410c
This tutorial video provides a detailed step-by-step process for how to Interface an I2C sensor and make kernel changes for the DragonBoard 410c, which features the Qualcomm Snapdragon 410 processor.